John Deere 5103E - Manual (Page 37)

Operating the Engine
PY80265,05GO819 –19–04JUL06–1/1
Before Starting the Engine
TS220
–UN–23AUG88
PY4108
–UN–21AUG04
Single Clutch Tractor
PY4953
–UN–27MAY05
Dual Clutch Tractor
PY4964
–UN–22APR05
A—Range Shift Lever
B—PTO Lever
C—Rockshaft Position Control Lever
D—Rockshaft Draft Control Lever
CAUTION: Prevent asphyxiation. Engine
exhaust fumes can cause sickness or death to
you or someone else.
If you must operate engine in a building, be
positive there is adequate ventilation. Either use
an exhaust pipe extension to remove the
exhaust fumes or open doors and windows to
bring enough outside air into the area.
1. Check fuel gauge to be sure tractor has plenty of fuel.
2. Place range shift lever (A) in neutral (N) position.
Starter will not operate if range shift lever is not in this
position.
3. Place rockshaft control levers (C and D) in lowered
position.
4. Check indicator lights. Indicators should illuminate
when key switch is turned to the “ON” position.
If any indicator does not function properly, see your
John Deere dealer.
45-1
022607
PN=35