John Deere 5103E - Manual (Page 61)

Rockshaft and 3-Point Hitch
PY80265,05GO854 –19–10SEP05–1/1
Preparing Implement
PY2274
–UN–07JUN06
Category II implements should have the top hole of the
implement mast located 610 mm (24 in.) above the lower
pins. Drill another hole in top mast or extend top mast if
necessary.
Category Mast Width Pin Size
Height Between
Lower Pins
Lower Upper
II 610 mm 824 mm 28.7 mm 25.5 mm
(24 in.) (32-7/16 in.) (1-1/8 in.) (1 in.)
55-6
022607
PN=59