John Deere AT-3402-J - Manual (Page 2)

2 Reciprocating Air Saw and File Operator's Manual
Congratulations on the purchase of your new John Deere Reciprocating Air Saw and File
Kit! You can be assured your saw kit was constructed and designed with quality and per-
formance in mind. Each component has been rigorously tested to ensure the highest level
of acceptance.
The John Deere reciprocating air saw makes cutting in confined area easy. Cuts straight
and curved surfaces, including pipe, mild steel, aluminum, fiberglass and plastic. Adjustable
guard aids in depth of cut. Features a lock-off lever throttle to prevent accidental starts and
a built-in regulator for speed control.
This operator's manual was compiled for your benefit. By reading and following the
simple safety, installation, operation, maintenance and troubleshooting steps described in
this manual, you will receive years of trouble-free operation from your new saw kit. The
contents of this manual are based on the latest product information available at the time of
publication. The manufacturer reserves the right to make changes in price, color, materials,
equipment, specifications or models at any time without notice.
Once the unit has been removed from the box, immediately write in the serial number of your
unit in the space provided below.
SERIAL NUMBER_________________________________
Inspect for signs of obvious or concealed freight damage. If damage does exist, file a claim
with the transportation company immediately. Be sure that all damaged parts are replaced
and that the mechanical problems are corrected prior to operation of the unit. If you require
service, contact your Customer Service.
Mi-T-M ® Corporation, 8650 Enterprise Drive, Peosta, IA 52068
1-877-JD-KLEEN / (1-877-535-5336) Fax 563-556-1235
Monday - Friday 8:00 a.m. - 5:00 p.m. CST
Please have the following information available for all service calls:
1. Model Number
2. Serial Number
3. Date and Place of Purchase
Introduction