260c – John Deere Greens 260C User Manual
Page 8
260C
ENGINE*
Type
Cycle
Bore and Stroke
Piston Displacement
Compression Ratio
Horsepower
Direction of Rotation of Output Shaft
Inclination Limit
Idle Speed at Output Shaft
Maximum Speed at Output Shaft
Honda, air-cooled GX120
4
2.36 in. x 1.73 in. (60 x 44 mm)
118 cc
8.5:1
4.0 hp (2.98 kW) @ 3,600 rpm
Counterclockwise viewed from shaft side
Tilted up to 20 degrees in any direction
1,300 rpm
3,100 rpm
Honda, air-cooled GX120
4
2.36 in. x 1.73 in. (60 x 44 mm)
118 cc
8.5:1
4.0 hp (2.98 kW) @ 3,600 rpm
Counterclockwise viewed from shaft side
Tilted up to 20 degrees in any direction
1,300 rpm
3,100 rpm
Honda, air-cooled GX120
4
2.36 in. x 1.73 in. (60 x 44 mm)
118 cc
8.5:1
4.0 hp (2.98 kW) @ 3,600 rpm
Counterclockwise viewed from shaft side
Tilted up to 20 degrees in any direction
1,300 rpm
3,100 rpm
FUEL
Type
Tank Capacity
Regular grade—unleaded or leaded
2.7 U.S. qt. (2.5 L)
Regular grade—unleaded or leaded
2.7 U.S. qt. (2.5 L)
Regular grade—unleaded or leaded
2.7 U.S. qt. (2.5 L)
OIL
Type
Capacity
Differential Drive Capacity
SAE 30 or SAE 10W-30
0.6 U.S. qt. (0.57 L)
0.7 U.S. pts. (0.35 L)
SAE 30 or SAE 10W-30
0.6 U.S. qt. (0.57 L)
0.7 U.S. pts. (0.35 L)
SAE 30 or SAE 10W-30
0.6 U.S. qt. (0.57 L)
0.7 U.S. pts. (0.35 L)
MACHINE
Cutting Equipment:
Cutting Width
Cutting Height (Minimum)
Standard—3.0 mm Bedknife
Optional—2.5 mm Bedknife
Optional—2.0 mm Bedknife
Optional—Tee Bedknife
Frequency of Clip
Standard
18 in. (45.7 cm)
1/8 in. (3.2 mm)
7/64 in. (2.8 mm)
5/64 in. (2.0 mm) (standard on 180C)
N/A
0.182 in. (4.62 mm)
22 in. (55.9 cm)
1/8 in. (3.2 mm) (standard on 220C)
7/64 in. (2.8 mm)
5/64 in. (2.0 mm)
N/A
0.182 in. (4.62 mm)
26 in. (66.0 cm)
1/8 in. (3.2 mm); max of 1.375-in. (35 mm)
with 3-in. roller
N/A
N/A
3/16 in. (4.8 mm)
0.182 in. (4.62 mm) 11 blade
0.286 in. (7.26 mm) 7 blade
REEL
Diameter
Number of Blades
Material
Bedknife—Standard
5 in. (127 mm)
11
Heat-treated chromium molybdenum steel
0.098-in. (2.5 mm) thick x 18-in. (45.8 cm) long
5 in. (127 mm)
11
Heat-treated chromium molybdenum steel
0.118-in. (3 mm) thick x 22-in. (56.0 cm) long
5 in. (127 mm)
11 or 7 blade
Heat-treated chromium molybdenum steel
0.118-in. (3.0 mm) thick x 26-in. (66 cm) long
ROTARY BRUSH AND GREENS
TENDER CONDITIONER (Optional)
Brush
Vertical Cutter Blades
Adjustable Brush or Cutter Height
Gear Drive
Grass Catcher
Interlocked w/reel, rotation in reverse
direction; 2 3/8-in. (60 mm) diameter nylon
Specially hardened carbon tool steel; star
shaped; 2 3/8-in. (60 mm) diameter; 60 blades
13/32 in. (10 mm) below to 5/8 in. (16 mm)
above cut
Gear driven from reel shaft opposite direction
of reel rotation powers brush or vertical cutter
6 Ib. (2.7 kg); polyethylene
Interlocked w/reel, rotation in reverse
direction; 2 3/8-in. (60 mm) diameter nylon
Specially hardened carbon tool steel; star
shaped; 2 3/8-in. (60 mm) diameter; 75 blades
13/32 in. (10 mm) below to 5/8 in. (16 mm)
above cut
Gear driven from reel shaft opposite direction
of reel rotation powers brush or vertical cutter
7 Ib. (3.2 kg); polyethylene
Interlocked w/reel, rotation in reverse
direction; 2 3/8-in. (60 mm) diameter nylon
Specially hardened carbon tool steel; star
shaped; 2 3/8-in. (60 mm) diameter; 88 blades
13/32 in. (10 mm) below to 5/8 in. (16 mm)
above cut
Gear driven from reel shaft opposite direction
of reel rotation powers brush or vertical cutter
8 Ib. (3.7 kg); polyethylene
CLUTCHES
Transport
Reel Jaw-Type Clutch
Brush/GTC Jaw-Type Clutch
Traction Drum
Belt tension
On/off
On/off
Dual, aluminum, traction
Belt tension
On/off
On/off
Dual, aluminum, traction
Belt tension
On/off
On/off
Dual, aluminum, traction
TRAVELING DEVICE
Forward Speed
Roller (Rear)
Roller (Front) (Grooved or Smooth)
5.2 mph (8.4 km/h) with transport wheels
@ 3,500 engine rpm
Aluminum, 7 1/2-in. (190 mm) diameter
Machined steel, 2 3/8-in. (60 mm) diameter
(for cutting height adjustment)
5.2 mph (8.4 km/h) with transport wheels
@ 3,500 engine rpm
Aluminum, 7 1/2-in. (190 mm) diameter
Machined steel, 2 3/8-in. (60 mm) diameter
(for cutting height adjustment)
5.2 mph (8.4 km/h) with transport wheels
@ 3,500 engine rpm
Aluminum, 7 1/2-in. (190 mm) diameter
Machined steel, 2 3/8-in. (60 mm) diameter
(for cutting height adjustment)
DIMENSIONS
Length (w/Tires Installed)
Width (w/Tires Installed)
Height (w/Tires Installed)
Weight (Less Brush Drive and
Transport Wheels, with Catcher)
Certifi cate
37 in. (94.0 mm)
33 1/4 in. (84.5 cm)
47 in. (119.0 cm)
203 Ib. (92.3 kg)
ANSI B71.4-2004
37 in. (94.0 mm)
37 1/4 in. (94.6 cm)
47 in. (119.0 cm)
219 Ib. (99.5 kg)
ANSI B71.4-2004
37 in. (94.0 mm)
41 1/4 in. (104.8 cm)
47 in. (119.0 cm)
235 Ib. (106.8 kg)
ANSI B71.4-2004
*The engine horsepower information is provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower will
be less. Meets 2007 CARB standards.
This literature has been compiled for worldwide circulation. While general information, pictures and descriptions are provided, some illustrations and text may
include fi nance, credit, insurance, product options and accessories NOT AVAILABLE in all regions. PLEASE CONTACT YOUR LOCAL DEALER FOR DETAILS. John Deere
reserves the right to change specifi cation, design and price of the products described in this literature without notice. John Deere’s green and yellow color scheme,
the leaping deer symbol, and JOHN DEERE are trademarks of Deere & Company.
DKA2633 (08-01) Litho in U.S.A. 08-2633
www.JohnDeere.com
180C
220C
PLATINUM
PARTNER
Vertis QCA
1300 19th Street, Suite 200
East Moline, IL 61244
Cyan
Magenta
Yellow
Black
08-2633 Page 8