JVC DD868EU - Manual (Page 68)

HR-DD868EU
COPYRIGHT © 1999 VICTOR COMPANY OF JAPAN, LTD.
EU
Auto Set Up
– referring to the display panel
The Auto Set Up function sets the tuner channels, clock and Guide Program numbers automatically.
BEFORE YOU START PLEASE MAKE SURE THAT:
Ⅲ
The TV aerial cable is connected to the ANT.IN jack on the rear panel of the video recorder.
Ⅲ
The video recorder's mains power cord is connected to a mains outlet.
Ⅲ
The video recorder is turned off.
Ⅲ
Load batteries into the remote control.
1
Press (recorder/remote) .
2
Press %fi (remote) to select the international telephone
country code.
● If you have selected a country code other than 32 (BELGIUM) or 41 (SUISSE), go to step 3.
● If you have selected 36 (MAGYARORSZAG), 42 (CESKA REPUBLIKA), 48 (POLSKA) or EE (OTHER EASTERN
EUROPE), press OK. Clock Set screen will appear. Set the clock manually ( ੬ pg. 56 – 57), then go to step 3.
● If you have selected 32 (BELGIUM) or 41 (SUISSE), press OK (remote) and select the language code by
pressing %fi (remote), then go to step 3.
(Ex.) DEUTSCHLAND is selected.
Language Code
ENGLISH : 01 NEDERLANDS : 06
DEUTSCH : 02 SVENSKA : 07
FRANCAIS : 03 NORSK : 08
ITALIANO : 04 SUOMI : 09
CASTELLANO : 05 DANSK : 10
Language Code
(Ex.) FRANCAIS is selected for BELGIUM
International Telephone
Country Code
FOR MORE INFORMATION
SEE INSTRUCTIONS/P4
EN
International Telephone Country Code
BELGIUM : 32 NORGE : 47
ESKÁ REPUBLIKA : 42 ÖSTERREICH : 43
DANMARK : 45 POLSKA : 48
DEUTSCHLAND : 49 PORTUGAL : 351
ESPAÑA : 34 SUISSE : 41
GREECE : 30 SUOMI : 358
ITALIA : 39 SVERIGE : 46
MAGYARORSZÁG : 36 OTHER WESTERN EUROPE : - -
NEDERLAND : 31 OTHER EASTERN EUROPE : EE
VICTOR COMPANY OF JAPAN, LIMITED
Printed in Malaysia
0599IYV
* ID * PJ1
3
Press OK (remote). "Auto" appears on the display panel.
4
Press OK (remote) to start Auto Set Up. Do NOT press any button on the video recorder or remote control during
"Auto" is blinking.
● If "– –:– –" appears on the display panel, see page 7 of the instructions.
* Once you have performed Auto Set Up, even if the recorder's memory backup has expired, the recorder will
not perform Auto Set Up again. Perform tuner setting (
੬
pg. 48) and/or clock setting (
੬
pg. 56) as required.