JVC MX-V508T - Manual (Page 8)

4
English
CAUTION: To avoid noise, keep antennas away from metallic parts of the System, connecting
cord and the AC power cord.
CAUTION: Make all connections before plugging the Unit into an AC power outlet.
Connecting the AM Antenna
If reception is poor, connect the outside antenna.
1 3
2
Outside FM Antenna Wire
1
AM Loop Antenna
Turn the loop until you
have the best reception.
Snap the tabs on the loop
into the slots of the base to
attach the AM Loop.
2 3
If reception is poor, connect the outside antenna. AM Antenna Wire (not supplied)
Before attaching a 75-ohm coaxial lead (the kind with a round wire going to an outside antenna), disconnect the supplied FM
Wire Antenna.
Note: Even when an outdoor AM Antenna is used, keep the indoor AM Loop Antenne connected.
Connecting the FM Antenna
Using the Supplied FM Wire Antenna
FM Wire Antenna
Extend the supplied FM Wire Antenna
horizontally.
Using a 75Ohm FM Wire Antenna (Not Supplied)
EN01-10;MX-D508T[U]/1 98.6.5, 9:37 AM 4