Jonsered SM 2186 - Manual (Page 13)

English –
13
DESCRIPTION
Folding Stops (C)
There are a number of folding stops for the log on the
left-hand side of the rails. To increase usability, the
stops come in two different lengths.
Log Locks (D)
The log locks consist of a cam with handle, housed in
a moveable unit. The locks are used to secure the log
against the folding stops.
Log Bolsters (A)
The rails have a number of transverse log bolsters that
provide a stable support for the log to be cut or the
planks to be trimmed.
Height Adjustment (B)
The height adjustment is designed to raise the small
end of the log, so that the core becomes horizontal.
Rails
The rails consist of two sections (standard delivery).
Each section is 3 m. The sections are aligned and
bolted together into a track for the carriage. The rail
sections are bolted together and fastened using M12
bolts with nuts, which assures stability and ensures
that the carriage runs straight.
The rails also have a number of transverse log bol-
sters, designed to provide a stable support for the log
to be cut or the planks to be trimmed.
The rails’ transverse log bolsters are equipped with:
• Folding stop for the log
• Log lock
• Height adjustment of one end of the log
The rails are also fitted with stops at both ends for the
saw carriage, as well as adjustable jointing plates on
the section joints.
FIG. 12
FIG. 13