Jonsered SM 2186 User Manual
Page 28
28
– English
7.
Loosen the log and turn it 90°.
8.
Adjust the top end of the log using the height
adjuster and secure the log with the flat surface
tightened against the stop.
9.
Cut off the upper sapwood.
10. Loosen the log, turn it 180°, lower the height
adjuster, and secure the log.
11. Cut the block according to the previous
instructions. Remember to compensate for the
thickness of the bandsaw blade for each
adjustment of the bandsaw blade’s height.
Data for the height adjustment crank:
• 1 turn = 5 mm.
The scale can also be used for varying standard
dimensions.
Edging (FIG. 51)
Several boards can be edged simultaneously by
clamping them against the stop.
Place a batten between the boards and the stop in
order to keep the boards still during cutting. The batten
should be at least 50 x 100 mm.
USE
FIG. 49
FIG. 50
FIG. 51