Jensen JiMS-210 - Manual (Page 5)

CLASS 1 LASER PRODUCT
This product contains a low power laser device.
CAUTION
INVISIBLE LASER REDIATION
WHEN OPEN AND INTERLOCKS
DEFEATED
AVOID EXPOSURE TO BEAM.
CLASS 1 LASER PRODUCT
APPAREIL LASER DE CLASSE 1
PRODUCTO LASER DE CLASE 1
3
5.Power Cord Protection
Power supply cords should be routed so that they are not likely to be walked on or pinched by items
placed upon or against them. It is always best to have a clear area from where the cord exits the unit to
where it is plugged into an AC outlet.
6.Cleaning
The unit should be cleaned only as recommended. See the section “Care and Maintenance” of this
manual for cleaning instructions.
7.Object and Liquid Entry
Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents
located on the product.
8.Attachments
Do not use attachments no recommended by the product manufacturer.
9.Lightning and Power Surge Protection
Unplug the unit from the wall outlet and disconnect the periods of time. This will prevent damage to the
product due to lightning and power-line surges.
10.Overloading
Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in
a risk of fire of electric shock.
11.Damage Requiring Service
This unit should be serviced by qualified service personnel when:
A.The power supply cord or plug has been damaged.
B.Objects have fallen into or liquid has been spilled into the enclosure.
C.The unit has been exposed to rain.
D.The unit has been dropped or the enclosure damaged.
E.The unit exhibits a marked change in performance or does not operate normally.
12.Antenna
Do not connect an external antenna to the unit (other than that provided).
13.Periods of Nonuse
If the unit is to be left unused for an extended period of time, such as a month or longer, the power cord
should be unplugged from the unit to prevent damage or corrosion.
14.Servicing
The user should not attempt to service the unit beyond those methods described in the user's operating
instructions. Service methods not covered in the operating instructions should be referred to qualified
service personnel.
IMPORTANT SAFETY INSTRUCTIONS
NOTE: This product complies with DHHS Rule 21 Subchapter J at date of manufacture.
Follow the advice below for safe and appropriate operations.