Jensen DV2007 - Manual (Page 18)

18
DV2007
Selecting the OSD setting allows the user to select a preferred language for the OSD menu
and messages. The following options are available:
6. Press Ok (after cycling through the options) to change the displayed value of the next
available option and change the setting.
The following subsections explain the available options for each of the possible Language
setting.
1. OSD Language
English = Menu/OSD is in English (factory default)
French = Menu/OSD is in French
Espanol = Menu/OSD is in Espanol
Deutsch = Menu/OSD is in Deutsch
Italian = Menu/OSD is in Italian
Portuguese = Menu/OSD is in Portuguese
Turkish = Menu/OSD is in Turkish
Russian = Menu/OSD is in Russian
Some DVDs may not include the pre-selected language. in this case, the unit will
automatically display menus in the disc’s initial language setting.
Video Settings
1. Using the Up/Down buttons, move to Video. The Player's Video settings will appear:
Press Ok again to choose the option and change the setting.
Press Ok (after cycling through the options) to change the displayed value of the next
available opions and change the setting
The following subsections explain the available options for each of the Video settings.
Selecting the TV Aspect setting allows the user to select the aspect ratio of the TV (DVD and
VCD only). The following options are available:
4:3 = Aspect ratio of TV is 4:3.
16:9 = Aspect ratio of TV is 16:9. Both widescreen and 4:3 contents will fill
the entire screen.
5.
6.
TV Aspect Ratio
Most widescreen DVDs will not allow pan & scan conversion. If 4:3 PS is
selected on these DVDs, letterboxing will be used instead.
If 16:9 is selected and a 4:3 TV is connected, 16:9 content will appear distorted
during playback (objects look thin).
2.
3.
4.
Use the Right buttons to select the setting.
Use the Up/Down buttons to select the setting to be changed.
Press Ok to cycle through each possible option or display a list of the options. When a list
of options appears, press the Up/Down buttons to move among the displayed options.
TV System (NTSC or PAL)
The Video setting allows the user to select the TV standard (DVD and VCD/SVCD only). The
following options are available:
NTSC = TV is NTSC. PAL content is played at NTSC resolution and frame
rate (factory default).
PAL = TV is PAL. NTSC content is played at PAL resolution and frame rate.
AUTO = If the content is PAL, the output is PAL. If the content is NTSC, the
output is NTSC
Playing PAL DVDs with TV SYS set to NTSC is not allowed.
The OSD will indicate:(OSD) PAL to NTSC error.