Jensen DV2007 - Manual (Page 7)

7
DV2007
8) SUB-WOOFER (SUB-W)
Press the SUB-W button to activate the Sub-woofer function On, and “Sub-woofer” will
appear on the LCD display for 3 seconds. press the SUB-W button again to turn off the
Sub-woofer function.
Press this button to remove the control panel.
8. BASIC OPERATIONS
3) PANEL RELEASE BUTTON (REL)
10)iX-BASS BUTTON (iX-Bass )
Press the iX-Bass button to turn on the IX-Bass function, and “iX-Bass” will appear in the
LCD display for 3 seconds. Press the iX-Bass button again to turn off the IX-Bass function
5) MODE BUTTON (MODE)
1) MUTE BUTTON (MUTE)
1) POWER ON/OFF BUTTON ( )
Short Press the MODE button to select a different mode of operation as indicated on the
display panel. Available modes include Tuner, DVD,AV IN-1 and AV IN-2 (optional).
18) DISPLAY (D)
Short Press the DISPLAY button repeatedly to select the following different Display options:
Spectrum mode 1 > Spectrum mode 2 > Spectrum mode 3 > Default Display.
Default Display True Spectrum Analyzer mode 2
True Spectrum Analyzer mode 3
The selected DISPLAY will appear in the display when the unit is turned on.
6) ENCODER VOLUME BUTTON
To increase the volume, rotate the volume control knob clockwise.
To decrease the volume, rotate the volume control knob counter clockwise.
When the volume is adjusted, the volume level is shown on the display panel as a number
ranging from 00 (lowest) to 46 (highest).
This feature is used to designate the strength of the signals at which the radio will stop
during automatic tuning. "Distance" is the default, allowing the radio to stop at a broader
range of signals. To set the unit to select only strong local stations during automatic
tuning,press this button until "Local" appears in the display.
9) LO / DX BUTTON
The unit is allowed to connect with external Audio /
Video system such like Digital Camera or DVD
Console. You can connect the external A/V system
thru the A/V in jack on front panel. After connect with
external A/V system, pressing mode to “A/V In 2” to
enjoy this external A/V system on this unit.
22) FRONT PANEL A/V IN JACK
3.5mm A/V Cable ( not included )
Video
Right Audio
Left Audio
Ground
1
2
3
4
The unit is only support the 3.5mm A/V Jack Pin Assignment shown as diagram.
RESET
To Reset the Main Unit System
To Reset the DVD Setting
After releasing the front panel, use a pencil or any non-metalic object to press & hold the reset
button for five seconds to reset the main unit and the unit will return to the factory default
settings.
Press SET UP button on remote control or long press AS/PS button to bring
up the SET UP Menu, select MISC then select use Default settings, the DVD
Setting will resume to factory default value .
Press POWER/MUTE button or any other button on the front of the radio (except Open/Eject) to
turn the unit on. And Long press POWER /MUTEbutton again to turn the unit off.
Short Press the MUTE button to mute the audio output, and “Mute” will appear on the
display. Press the mute button again to restore the audio output to the previous level.
True Spectrum Analyzer mode1