JVC HD-70G887 - Manual (Page 34)

34
Onscreen Menus
Auto Tuner Setup
The auto tuner setup function is described on page 26 as the interactive plug-in menu. If you
need to run the auto tuner setup again, follow the steps below.
Press the M ENU button
π† To AUTO TUNER SETUP
è To operate
è To choose CABLE or AIR
Press the O K button to start
The auto tuner is finished when the message PROGRAMMING OVER! appears onscreen.
AUTO TUNER SETUP
OPERATE EXIT MENU
AIR TUNER MODE
PRESS OK TO START
Note:
• Auto Tuner Setup in Digital Cable will take approximately 14 minutes.
LCT2063-001C-A ENG.indd 34 LCT2063-001C-A ENG.indd 34 8/10/06 8:56:43 AM 8/10/06 8:56:43 AM