GE 45236 GE Wireless Color Camera with Portable LCD Monitor - Manual (Page 12)

12
3. Set Channel switch on camera to 1 or 2. Slide the
camera onto the alignment and locking pins of the
mounting plate. Plug in AC adapter into camera.
4. Adjust antenna and camera angle as needed for
the clearest picture.
AUDIO DETECTION AND NOTIFICATION FEATURE
This feature allows the system to emit an audio alert
whenever sound is detected within a monitored area.
When the camera detects a sound, the LCD Monitor
will sound an alert and then display the picture
from the camera that detected the sound for a few
seconds. The alert sound volume can be adjusted
by pressing the Alarm Volume button on the top of
the LCD Monitor. Sound sensitivity can be set with
the sensitivity adjustment control on the back of the
Monitor. The alert sound can be turned off by setting
the sensitivity adjustment to the ‘MIN’ position.
MENU FUNCTIONS
By pressing the Menu button, you can adjust the
brightness, color and contrast of the LCD monitor.
1. Pressing the “menu” button once…
the First LED will light-up in blue. You can then
adjust the Brightness by pressing “+” or “-”
on the Volume/Adjust Button. If no input is
received within 30 seconds, it will revert back
to Volume Adjust mode automatically. •