GE 45236 GE Wireless Color Camera with Portable LCD Monitor - Manual (Page 7)

7
CHANNEL SELECTION
Manual, Auto or Stand-by
The wireless system can be
set to operate in one of
three modes:
Manual, Auto or
Stand-by. The
desired operating
mode can be selected
using the buttons on
the front panel of the
LCD monitor.
Manual Mode
To select one of the two channels manually,
press the ‘M’ (Manual) button on the front panel
of the Monitor. The green LED will light for the
corresponding channel. The Monitor will switch to
a different channel (1 or 2) each time the MANUAL
button is pressed. When you have selected the
channel with the active camera, that video will
appear on the monitor screen. Each camera must
be assigned to a specifi c channel; both cameras
cannot be on the same channel or the signals
will cancel out.
Multi-Camera Operation
This wireless surveillance system is designed to work
with up to 2 cameras. Additional cameras are sold
LCD
MONITOR
Power
M
A
S
Adjustable
Antenna
Manual
Auto
1 2
Stand
by