GE 98012 GE UltraSonic 2.1 Speakers - Manual (Page 4)

4
5.
Installation
Read all instructions carefully and follow each
step in order. Shut down your computer and
turn off power to speakers before installation.
Failure to do so could result in injury or
equipment damage.
Connect the Left and Right satellite speaker
cables to the appropriate satellite speaker
connectors on the back of the subwoofer.
Make sure to connect the right speaker to the
right jack and the left speaker to the left jack
for accurate stereo sound.
Connect the 3.5mm stereo cable to the input
jack on the back of the subwoofer and to the
output jack on your computer sound card (The
cable end is color coded to match the green
color of the output jack on most sound cards).
On portable audio devices, plug the 3.5mm
jack into the headset jack.
Connect the power adapter to the AC input jack
on the subwoofer and to a standard AC
electrical outlet (A GE surge protector is
recommended to protect your new 2.1
UltraSonix™ Speaker System.)