JVC TK-C676 - Manual (Page 27)

27
AUTO PAN/PATROL/TRACE Screen
Item
AUTO PAN MODE
AUTO PAN SPEED
A. PAN START
POS. SET..
A. PAN RETURN
POS. SET..
AUTO PATROL SET
AUTO TRACE SET
RM. A. PAN KEY
RM. A. PATROL KEY
Initial Value
RETURN
NORMAL
–
–
–
–
AUTO PAN
AUTO PATROL
Function & Setting
Determines movement during auto panning.
RETURN : Moves continuously between start and return positions.
RIGHT
: Clockwise rotation
LEFT : Counterclockwise rotation.
☞
P. 34, “AUTO PAN Setup”
Sets the rotation speed during auto panning.
LOW
: Low speed.
NORMAL : Normal speed.
HIGH
: High speed.
Sets the auto panning start position.
Sets the auto panning return position.
Sets the configuration of the auto patrol function.
☞
P. 35, “AUTO PATROL Setup”
Sets the configuration of the auto trace function.
☞
P. 36, “AUTO TRACE Setup”
Determines the function activated by pressing the AUTO PAN button on the remote
control unit.
A. PAN
: Auto pan function.
A. PATROL : Auto patrol function.
A. TRACE : Auto trace function.
Determines the function activated by pressing the AUTO PATROL button on the re-
mote control unit.
A. PAN
: Auto pan function.
A. PATROL : Auto patrol function.
A. TRACE : Auto trace function.
This screen sets up the auto pan function for slow panning, the auto patrol function for switching of positions in sequence, and the
auto trace function for the reproduction of the results of manual camera operations.