JVC DLA-M4000LU - Manual (Page 18)

No.51666
DLA-M4000LU DLA-M4000LE
34
Operating the Main Menu (Cont.)
Changing the Color System
Color system (DECODER) display
AUTO is set for the color system when the projector is shipped from
the factory. Normally, use it in AUTO. If operation in AUTO is unstable
such as with color not being shown, set to a dedicated color system
in accordance with the color system of the signal being input.
1 Press the MENU/ENTER button.
• The main menu is shown on the screen.
2 Press MENU/ENTER toward the 5 or ∞
mark to select “DECODER”.
• The selected item (displayed in text) is shown in magenta color
on the screen.
3 Press MENU/ENTER toward the 2 or 3
mark to set.
• Each time you press MENU/ENTER toward the 2 or 3 mark,
the color system changes as follows:
3 : Forward / 2 : Backward
AUTO ................... Normally, set to AUTO. The color
system of a signal being input is
automatically identified.
NTSC(480i) .......... Dedicated to NTSC(480i).
NTSC4.43 ............ Dedicated to NTSC4.43.
PAL ...................... Dedicated to PAL.
SECAM ................ Dedicated to SECAM.
Memo
About automatic signal identification
• AUTO is selected when shipped from the factory. In AUTO, the color system
(DECODER) of the signal being input is automatically identified and indicated
in ( ). Refer to the main menu display.
• If operation in AUTO is unstable such as with color not being shown, set to a
dedicated color system in accordance with the color system of the signal
being input. When the dedicated color system is set, be careful as automatic
identification does not work.
■ To finish the main menu, press the PAGE BACK
button.
■ Remote control unit
■ Main menu
Note
• When computer-related signal is input, the display of the
color system is changed to gray color, making operation
impossible. When video signals from AV devices are input,
the item for the color system can be set.
N T S C ( 4 8 0 i )
E N G L I S H
P I X E L C L O C K
P O S I T I O N
P I C T U R E
O P T I O N S
S O U R C E
C H A N N E L
U S E R S O U R C E S E T U P
D I S P L A Y S I Z E
D E C O D E R
L A N G U A G E
Y P B P R
C H : 1
H D T V ( 1 0 8 0 i )
MEN U/E N T E R
QUICK ALIGN. AV HIDE OPERATE
PRESET
AV
SHIFT ZOOM FOCUS
LENS
U T +
D W –
RGB/COMPUTER
LENS
LOCK
UNLOCK
PAGE BACK PAGE BACK button
MENU/ENTER button
35
Operating the Main Menu (Cont.)
Changing the Language Display
Language display
The language in the menu display is set to English when shipped
from the factory. When you want to change to another language, set
it as follows.
1 Press the MENU/ENTER button.
• The main menu is shown on the screen.
2 Press MENU/ENTER toward the 5 or ∞
mark to select “LANGUAGE”.
• The selected item (displayed in text) is shown in magenta color
on the screen.
3 Press MENU/ENTER toward the 2 or 3
mark to set.
• Each time you press MENU/ENTER toward the 2 or 3 mark,
the selected language changes as follows:
3 : Forward / 2 : Backward
............ Japanese
............ English
............ German
............ Spanish
............ Italian
............ French
Memo
About language display
English is selected when the projector is shipped from the factory. The
languages in the menu display are the following six :
(Japanese),
ENGLISH, DEUTSCH (German), ESPAÑOL (Spanish), and FRANÇAIS
(French).
However, some text such as “QUICK ALIGNMENT” is displayed only in English.
Unique designations such as line display and source display are similarly
indicated.
■ To finish the main menu, press the PAGE BACK
button.
■ Remote control unit
■ Main menu
Note
• The selected item is shown in magenta color. Items shown
in gray cannot be operated or set in the current mode.
N T S C ( 4 8 0 i )
E N G L I S H
P I X E L C L O C K
P O S I T I O N
P I C T U R E
O P T I O N S
S O U R C E
C H A N N E L
U S E R S O U R C E S E T U P
D I S P L A Y S I Z E
D E C O D E R
L A N G U A G E
Y P B P R
C H : 1
H D T V ( 1 0 8 0 i )
MEN U/E N T E R
QUICK ALIGN. AV HIDE OPERATE
PRESET
AV
SHIFT ZOOM FOCUS
LENS
U T +
D W –
RGB/COMPUTER
LENS
LOCK
UNLOCK
PAGE BACK PAGE BACK button
MENU/ENTER button