GE 98536 GE Wireless Laser Mouse - Manual (Page 3)

Page 3
Hardware Installation
Please keep these directions in a safe place.
1)
Insert the enclosed batteries into the battery compartment
located on the bottom of your mouse. Make sure they are
facing the proper direction.
2) Plug the GE Wireless Laser Mouse receiver into an available
USB port on your computer or GE USB hub. It is not
necessary to reboot your computer.
3)
Place your Wireless Optical Mouse within 30 feet
(approximately 9 meters) of the receiver for optimal
communication.
4) Move the mouse to ensure there is a good connection.
5) If the mouse does not work, you may need to move the
receiver closer. See the Troubleshooting section for
instructions.