JVC VN-C655U - Manual (Page 22)

22
4.
Rotate the camera.
Make sure that the camera is horizontal, then
turn the camera clockwise until it stops. En-
sure that the camera-clamping bracket is in
line with the locking screw of the Ceiling
Mount.
5.
Tighten the locking screw.
Tighten the lock screw using a Phillips screw-
driver.
* To remove the camera from the Ceiling
Mount, reverse the steps 1 to 5 .
Attaching the Camera (continued)
Caution
If the locking screw is not tightened firmly,
the camera may vibrate or come loose. Be
sure to tighten the locking screw firmly.
Tighten the locking screw.
Lock screw
Rotate the camera
clockwise.
Camera clamping bracket
Preparations (Step 1 Connection and Installation)
VN-C655(reed me)_p2-29 04.9.22, 8:18 PM 22