JVC VN-C655U User Manual
Page 29
29
Note
In a system where more than one VN-C655 are used, turn on the power for a VN-C655 first
and proceed the setting to Step 3 Settings with V.Networks Setup Tool. Only then turn on the
power for a second one and go on to Step 3. Repeat the procedure for the other cameras.
2.
Confirm the settings.
3.
Click
.
4.
Start up [V.Networks Controller].
For other settings,
☞ next page
Click
to update the values.
Select whether to use DHCP.
Note
● With DHCP selected, the IP ad-
dress of the DHCP server etc. can
be checked.
Change the IP address to the one alloted,
or approved, by the network administrator.
Note
A new IP address becomes effective
when VN-C655 is automatically reset.
Set the subnet mask to an appropriate
value according to the operating environ-
ment. Ask the network administrator if nec-
essary.
[V.Networks ID] works as an identifica-
tion code set to VN-C655. Only alphanu-
meric characters can be used. This ID
does not directly affect the operation by
the user. Normally, the ID should be set
as “CAM00001,” “CAM00002” etc.
(0 to 8 characters)
Click
.
VN-C655(reed me)_p2-29
04.9.22, 8:19 PM
29