JVC DLA-RS35 - Manual (Page 16)

2 Preparation
16
Selecting Connecting Devices
●
Do not turn on the power until connection is complete.
●
The connection procedures differ according to the device used. For details, refer to the instruction manual of the device to be
connected.
●
This device is used for image projection. Connect to an audio output device such as amplifier and speaker for audio output
from the connected device.
●
The images may not be displayed depending on the devices and cables to be connected.
For HDMI cable (sold separately), only use one that is HDMI-approved.
●
It may not be possible to connect to this unit depending on the dimension of the connector cover of the cables to be
connected.
To connect via HDMI terminal ( P18)
To connect RS-232C terminal
(external control) ( P52)
To connect via component video terminals ( P17)
To connect via video terminal ( P17) To connect via S-video terminal ( P17)
BD/DVD Recorder
BD/DVD Player
PC
VCR and camcorder
To connect via Trigger terminal ( P20) To connect via PC terminal ( P20)