Compliance with fcc regulations – Jensen JiSS-585 User Manual

Page 4

Advertising
background image

6. Cleaning

The unit should be cleaned properly with care.

7. Objects and Liquid Entry

Care should be taken so that objects do not fall and liquids are not spilled into any opening or vents

located on the product.

8. Attachments

Do not use attachment not recommended by the product manufacturer.

9. Lightning and Power Surge Protection

Unplug the unit from the wall outlet and disconnect the periods of time. This will prevent damage to

the product due to lightning and power-line surges.

10. Overloading

Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result

in a risk of fire of electrical shock.

11. Damage Requiring Service

This unit should be serviced by qualified service personnel when:

A. The power supply cord or plug has been damaged.

B. Objects have fallen into or fluid has been spilled into the enclosure.

C. The unit has been exposed to rain.

D. The unit has been dropped or the enclosure damaged.

E. The unit exhibits a marked change in performance or does not operate normally.

12. Periods of Nonuse

If the unit is to be left unused for an extended period of time, such as a month or longer, the power

cord should be unplugged from the unit to prevent damage or corrosion.

13. Servicing

The user should not attempt to service the unit beyond those methods described in the user’s

operating instructions. Service methods not covered in the operating instruction should be referred

to qualified service personnel.

COMPLIANCE WITH FCC REGULATIONS

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:

(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may

cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this

3

Advertising