JVC VN-V25U VN-V26U - Manual (Page 49)

49
B 1st Trigger For specifying the first trigger to be activated.
Either alarm input (make), alarm input (break) or motion detection can be
selected.
Ⅵ For VN-V26U, you can specify the following items in addition to the above.
BlackWhite
B Color : When the image switches from the black-and-
white mode to color mode
Color B BlackWhite : When the image switches from the color to black-
and-white mode.
Note:
● When the second trigger is turned off, the action will be invoked only by
the first trigger.
● When AMotion detectionB, ABlackWhite B ColorB, AColor B BlackWhiteB
is selected as the first trigger, selection of AMax. IntervalB and A2nd
Trigger B will be disabled.
C Max. Interval Enabled when both the first and second triggers are specified.
Specify the maximum interval between the first and second triggers. An
action will be invoked only if the interval between the first and second
triggers is within the maximum interval.
D 2nd Trigger For specifying the second trigger for invoking an action.
Either alarm input (make) or alarm input (break) can be selected. Unlike the
first trigger,
AMotion detectionB, ABlackWhite B ColorB, AColor B
BlackWhite B is not available as an option.
VN-V25U_26U_EN.book Page 49 Friday, January 18, 2008 2:56 PM