Operation of built-in viewer (continued) – JVC VN-V25U VN-V26U User Manual
Page 86
86
JPEG Viewer Configuration (continued)
Note:
● The settings of the built-in viewer are stored
in the file named Cookie.
Note:
Searching and deleting cookie files
● Open [Tool]-[Internet Options]-[Advanced]
of the Internet Explorer, and press the
[Settings] button under [Temporary Internet
Files]. A new [Settings] will appear. Press the
[View Files] button in this window. The
[Temporary Internet Files] window opens up
and a list of files will be displayed. The file
named
Acgi-binB in this list is the Cookie for
the built-in viewer.
● Deleting this file deletes the view settings,
and the viewer will be initialized during the
next startup.
Operation of Built-in Viewer
(continued)
Multicast IP
Address
You can change the multicast IP address.
The default IP address setting is 225.0.1.1.
Multicast Port
You can change the multicast port number.
The default port number setting is 49152.
This is enabled when
AStartB is selected for the [JPEG Control] item on
the [Streaming] page.
Specify the same value as the parameter that is set on the [Streaming]
page of VN-V25U/26U. (
C
Folder Name
For specifying the name of the folder in which the captured files are
stored. (When the viewer is installed: The folder names for VN-V25U and
VN-V26U are VN-V25 and VN-V26 respectively.)
D
OK
Saves the changed settings.
Click the [OK] button to enable the new settings and restart the built-in
viewer after closing the setting window.
E
Cancel
Cancels the changed settings and closes the setting screen.
This setting screen is used to set the built-in
viewer as a software on the computer, and
does not apply to settings of the VN-V25U/
26U unit.
When settings are changed, press the [OK]
button to exit and restart the viewer.
VN-V25U_26U_EN.book Page 86 Friday, January 18, 2008 2:56 PM