Setting up, Make sure that the battery pack is fully charged – JVC MP-XP7210GB User Manual

Page 16

Advertising
background image

16

EN

5. Make sure that the battery pack is fully charged

To avoid an interruption of your operation due to power failure, check the battery voltage when
you start to use your PC in the field. See "Checking the battery level" (see Page 61) to check the
battery voltage level.

¡ Make sure that the battery pack is fully recharged
When you are using the AC adapter and when the battery indicator (

) lights in green, the

battery pack is fully (100%) recharged. When it lights in orange, the battery pack is being recharged.
Battery recharge starts with the built-in battery or external battery pack, whichever has less
remaining power.

1

2

1

2

Built-in battery indicator

External battery indicator
Standard battery pack or large
capacity battery pack

( )

If you have unplugged the DC cable of the AC adapter and if you drive your PC with the lithium
battery pack, the battery indicator (

) goes out.

Standard recharging time:

80% recharging time

100% recharging time

Built-in battery pack

Approximately 60 minutes

Approximately 90 minutes

Both built-in battery pack and BN-LS11E standard battery pack

Approximately 170 minutes

Approximately 250 minutes

Both built-in battery pack and BN-LL21E large capacity battery pack

Approximately 240 minutes

Approximately 370 minute

s

Cautions
¡ If the battery pack is discharged quickly even after its recharging, the battery service life has

expired. Replace it with a new one. (The built-in battery pack and CMOS backup cells are
service parts.)

¡ The standard recharging times listed above are typical values in an ambient temperature of 20°C

to 25°C.

¡ If the battery pack has been stored for a long time, its first recharging time may be longer.

SETTING UP

XP7210/3210-2-20

02.8.6, 8:22 PM

16

Advertising
This manual is related to the following products: