JVC MP-XP7210GB - Manual (Page 38)

38
EN
Connecting to the Internet
After you have completed the "The Internet Connection Setup" procedure (pages 33 to 37), you
can connect to the Internet. Use the following procedure.
1. Click [start] and click [Internet] at the upper left part of the Menu.
The Internet Explorer will start up and the "Dial-up Connection" screen will appear. If the
"Dial-up Connection" does not start, use the following steps.
1 Click [start] and right click [Internet] at the left upper end of the Menu. Then, select
[Internet Properties].
2 Click the [Connections] tab and make sure that the ISP name (you have created in Step 6
"The Internet Connection Setup" on page 34) has been set to default in the [Dial-up and
Virtual Private Network settings]. If not set as default, select the ISP and click [Set Default].
3 Click [Always dial my default connection], and click [OK].
2. Click [Connect].
The dialup connection process will start and your PC will be connected to the Internet.
Tips
When your PC is connected to the Internet, the icon appears in the Task tray
at the bottom right corner of the desktop screen.
NAVIGATE IN THE INTERNET WORLD!
XP7210/3210EN-30-47 02.8.6, 7:53 PM 38