JVC GC-QX3HD - Manual (Page 33)

EN
33
2
1
3,4
Flash Shooting
There are four flash modes:
Auto
: This setting automatically flashes when shooting under dark conditions.
Forced on : Select this setting to force the flash.
Red-eye prevention : Select this setting to minimize the “red-eye” effect that occurs when using the
flash. The flash is forced to light.
Off : Select this setting to disable the flash even when shooting under dark conditions.
Note that in order to prevent blurry photos a tripod should be used with this
setting, since the shutter speed is slower.
1 Turn the Power dial to “A” or “M”.
•Hold the Lock button down while turning the
Power dial.
2 Press the Flash button and select the flash
mode.
•The “
” indicator appears on the LCD
panel.
•Press the Flash button repeatedly to cycle
through the following modes:
“Off”
→
“ (auto)”
→
“ (forced on)”
→
“ (red-eye prevention)”
→
“Off”
•If the mode is set to any mode other than
“Off”, charging starts and the flash standby
lamp (red) flashes. When the flash standby
lamp remains lit steadily, charging is
complete.
3 Point the lens at the subject, position yourself,
and half-press the Shutter button.
4 Press the Shutter button all the way to take
the picture.
•The flash lights and the flash standby lamp
(red) begins flashing.
•In red-eye prevention mode, the flash lights
twice. The first flash is designed to reduce the
red-eye effect. The second flash is when the
picture is actually taken.
NOTES:
● Though the image on the LCD screen may appear
dark, there is no problem with the recorded
image.
● When the flash is turned on, the iris value is set to
F2.8/3.8 automatically.
● When shooting with the flash, it is not possible to
set the iris and exposure manually.
● Do not press the Shutter button while the flash is
being charged.
OFF
M
4
SET
V