JVC GC-QX3HD - Manual (Page 5)

EN
5
QUICK START
Power outlet
Connect the Camera to a Power
Outlet. (
੬ pg. 20)
1 Open the connector cover on the rear of the
camera.
2 Connect the DC cord to the DC input
connector.
3 Connect the DC cord to the DC input
connector on the AC adapter.
4 Connect the power cord to a power outlet.
•The power lamp on the charger lights.
Insert the Memory card. (
੬ pg. 22)
1 Open the Memory card cover.
•Slide the knob to the open position.
2 Insert the Memory card.
•Insert the card so that the contact surface is
facing up and the notch on the card is on the
right.
•Turn power dial to “OFF” before inserting or
removing a Memory Card.
3 Close the Memory card cover.
•Slide the knob to the close position.
Power lamp
Power cord
AC adapter
(AA-V37)
DC input connector
Memory card (3.3V type)
Memory card cover
DC cord
Knob