Acquiring ftp server address setting from vn-e4, Setting ftp server address for vn-e4, Acquiring ftp server directory setting from vn-e4 – JVC 4ch Network Encoder VN-E4 User Manual

Page 34: Setting ftp server directory for vn-e4, Api for acquiring/changing parameters of vn-e4

Advertising
background image

34

5. API for Acquiring/Changing Parameters of VN-E4 _

5.5. Alarm Environment Setting

Acquiring FTP Server Address Setting from VN-E4

Format

/api/param?application.ftp.host

Example of Response

application.ftp.host=10.0.0.200&200 OK

Response example
when setting field is
left blank

application.ftp.host=&200 OK

Interpretation

Acquire the FTP server address setting used for FTP transmission via alarm.

Allowed users

admin, operator, user

Setting FTP Server Address for VN-E4

Format

/api/param?application.ftp.host=data

Example

/api/param?application.ftp.host=10.0.0.200

Example of Response

application.ftp.host&200 OK

Interpretation

Change the FTP server address setting used for FTP transmission via alarm. Specify the IP address or FQDN.
The maximum FQDN size is 60 bytes. Specify as 0.0.0.0 when the FTP server is not set. It is also possible to
leave the setting field blank as follows.

/api/param?application.ftp.path=%00

Allowed users

admin, operator

Acquiring FTP Server Directory Setting from VN-E4

Format

/api/param?application.ftp.path

Example of Response

application.ftp.path=subdir1&200 OK

Response example
when setting field is
left blank

application.ftp.path=&200 OK

Interpretation

Acquire the FTP server directory setting used for FTP transmission via alarm.

Allowed users

admin, operator, user

Setting FTP Server Directory for VN-E4

Format

/api/param?application.ftp.path=data

Example

/api/param?application.ftp.path=subdir1

Example of Response

application.ftp.path&200 OK

Interpretation

Change the FTP server directory setting used for FTP transmission via alarm. It is possible to set FTP
transmission to a directory under the FTP server home directory by specifying that directory name. Use / to
segment the directory. The maximum directory name size is 60 bytes.

Example

/api/param?application.ftp.path=subdir1/subdir2

By leaving the setting blank as follows, FTP transmission will be set to the FTP server home directory.

/api/param?application.ftp.path=%00

Allowed users

admin, operator

Advertising