JVC KW-NT1 - Manual (Page 70)

70
ENGLISH
Initial: Underlined
Menu items Selectable settings
System
Language * 1 Select the language used for on-screen information and voice guidance.
English, Español, Français
Time Format Select either 12-hour system or 24-hour system.
12 Hours, 24 Hours
DST * 1
(Daylight Saving Time)
Activate this if your residential area is subject to DST.
Auto : Activates daylight saving time.
Off : Cancels.
Time Zone * 1 Select your residential area from one of the following time zones for
clock adjustment.
Hawaii, Alaska, Pacific, Mountain, Central, Eastern, Atlantic,
Newfoundland
Tuner Area US : When using in North/Central/South America. FM/AM intervals are
set to 200 kHz/10 kHz.
EU : When using in any other areas. FM/AM intervals are set to 50 kHz
(100 kHz during auto search)/9 kHz.
SA : When using in South American countries where FM interval is
100 kHz. AM interval is set to 10 kHz.
Beep On: Activates the key-touch tone.
Off: Cancels.
Startup Message Edit the voice message at startup/shutdown of the System.
• To edit the message, press [Edit], enter the message, then press
[OK].* 2 You can listen to the edited message by pressing [Test].
Shutdown Message
Reverse Signal Polarity * 1 Battery, GND (
☞ page 9)
Restore Factory Default Initialize all settings you have made. Press [Restore] to initialize the
settings.
• When restoring the settings, adjust the settings on installation
setting screen (
☞ page 9).
* 1 The setting varies depending on the installation settings (
☞page 9).
* 2 For entering the characters,
☞ page 23.
AV menu items
EN_KW-NT1[J]f.indb 70 EN_KW-NT1[J]f.indb 70 09.3.24 6:20:19 PM 09.3.24 6:20:19 PM