John Lewis Fridge-Freezer JLFFW2013 - Manual (Page 10)

The maximum quantity of foods to freeze in
24 hours is shown on the rating plate.
To freeze the amount of food indicated on the
rating plate, place the food directly in touch
with the cooling surface (remove the drawer
or basket). In case the food is frozen inside the
drawers or baskets, the maximum quantity is
slightly reduced.
To freeze fresh foods, you will need to
activate the Action Freeze function. Press key
(D) (several times if necessary) until
indicator appears.
You must confirm the choice by pressing key
(E) within few seconds. You will hear the
buzzer and on the display will appear some
animation with lines.
After a pre-cooling period of 24 hours, place
the foods in the freezer.
Place the food to be frozen in the
compartment, as this is the coldest point.
The freezing process takes 24 hours. During
this period do not put other foods in the
freezer.
This function stops automatically after 52
hours.
It is possible to deactivate the function at any
time by pressing key (D) until
indicator will
flash and then press key (E).
Drinks Chill Function
The Drinks Chill function is to be used as a
safety warning when placing bottles in the
freezer compartment. It is activated by
pressing key (D) (several times if necessary)
until the corresponding icon appears .
You must confirm the choice by pressing key
(E) within few seconds. You will hear the
buzzer and the icon remains lighted.
In this condition it operates a timer with a
default value of 30 min. and it could change
from 1 to 90 min., by pressing key (B) you
select the minutes needed.
At the end of the selected time there are the
following indications:
• on the indicator
the symbol flashing
• the icon flashing
• the icon flashing
• sounding of an acoustic alarm until key (E)
is pressed
At this point bear in mind to remove the
drinks contained in the freezer compartment.
It is possible to deactivate the function at any
time by pressing key (D) until the
corresponding icon will flash and then key (E).
Excessive temperature
alarm
An increase in the temperature in a
compartment (for example due to an power
failure) is indicated by:
• flashing temperature
• freezer compartment flashing
• flashing of the icon
• sounding of buzzer
When normal conditions are restored:
• the acoustic signal shuts off
• the temperature value continues to flash
When you press key (E) to de-activate the
alarm, the highest temperature reached in the
compartment appears on indicator
for
some seconds.
Then it returns on the normal operation
showing the temperature of the selected
compartment.
During the alarm phase, the buzzer can be
switched off by pressing key (E).
10