Electrical connection – John Lewis Fridge-Freezer JLFFW2013 User Manual

Page 21

Advertising
background image

A

B

min

100 mm

20 mm

Warning! It must be possible to
disconnect the appliance from the
mains power supply; the plug must
therefore be easily accessible after
installation.

Electrical Connection

Caution! Any electrical work
required to install this appliance should
be carried out by a qualified electrician
or competent person.

Warning! This appliance must be
earthed.
The manufacturer declines any liability
should these safety measures not be
observed.

Important! The wires in the mains lead are
coloured in accordance with the following
code:

1

2

3

4

5

1

Green and Yellow:

Earth

3

Brown:

Live

5

Blue:

Neutral

As the colours of the wires in the mains lead
of this appliance may not correspond with the
coloured markings identifying the terminals in
your plug, proceed as follows:
1. Connect the wire coloured green and

yellow to the terminal marked either with
the letter “E“ or by the earth symbol
or coloured green and yellow.

2. Connect the wire coloured blue to the

terminal either marked with the letter
“N“ or coloured black.

3. Connect the wire coloured brown to the

terminal either marked with the “L“ or
coloured red.

4. Check that no cut, or stray strands of wire

is present and the cord clamp

4

is secure

over the outer sheath.

5. Make sure the electricity supply voltage is

the same as that indicated on the
appliance rating plate.

6. Switch on the appliance.

21

Advertising