JVC AV 32F476 EN - Manual (Page 13)

13
Notes:
• Green, blue and red are the most common colors for DVD cables. Some models may vary
colors. Please consult the user’s manual for your DVD player for more information.
• Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete
one set of connections (DVD or audio output) before starting the other to avoid accidentally
switching the cables.
• If you use INPUT 2 (Component-In), for a DVD connection, you must select
"V2-COMPONENT" by pressing the I
NPUT
button, for proper display of the DVD signal.
• Progressive DVD players (players with an output scan of 31.5 KHz) will not work properly with
this television. Set your DVD player’s output to “interlaced”, or non-progressive mode.
Diagram #3
Illustration of AV-32F476
Quick Setup Connections
S VIDEO VIDEO
INPUT 1
R L MONO
AUDIO
OVER
R L
75Ω
(VHF / UHF)
COMPONENT
VIDEO
Video/Y
PB
PR
AUDIO OUT
INPUT 2
Cable or Antenna
Output
Coaxial Cable
VCR
Green
Blue
Red
DVD Player (OPTIONAL)
OUT
R L V
IN
OUT
Y
P B
P R
OUT
AUDIO OUT
L R OR
IN
Headphone Connection
You can connect a pair of headphones to the television using the headphone jack located under
the front panel door. To access, push on the door to open it.
1) Plug a headphone jack into the headphone jack on the television’s front panel.
Note:
• AV-20F476 ONLY
LCT1785-001A-A ENG 13 12/16/04, 2:38:35 PM