JVC AV 32F476 EN - Manual (Page 42)

42
Button Functions
The R ETURN + button has two functions:
Return - Returns to the channel viewed just before the channel currently onscreen.
Return+ - Lets you program a specific channel to return to while scanning through the channels
using the CH+ and CH– buttons.
R ETURN + and hold for three seconds
The channel currently active has been programmed as your return+ channel. Now scan through
the channels using the C HANNEL +/– buttons.
R ETURN +
You will return to your programmed channel.
• To cancel your Return+ channel, press and hold the R ETURN + button for three seconds. The
message “RETURN CHANNEL CANCELLED!” will appear.
• Return+ works only with the CH+/– buttons. Pressing any number key will cancel Return+.
Return +
Selects the signal input source for the television: TV (for Antenna or Cable) or Video-1, 2, or
V2-Component or Video-3 for video devices like VCR’s, DVD players, or camcorders.
Press the I NPUT button
Note:
• You can also access the input menu screen by using the M
ENU button on the front of the TV
instead of the remote control. It appears between INITIAL SETUP and PICTURE ADJUST
screen. Choose the INPUT by pressing M
ENU † on the front panel and select TV or VIDEO
INPUT by using the C HANNEL +/- buttons ( √ OPERATE ® ).
Input
RETURN CHANNEL
PROGRAMMED!
TV VIDEO-1 VIDEO-2 VIDEO-3 V2-COMPONENT
LCT1785-001A-A ENG 42 12/16/04, 2:38:47 PM