JVC YU30052-572 - Manual (Page 18)

18
EN
RECORDING Advanced Features (cont.)
+ 02
+ 06 – 06
Digital Image Stabilizer
This feature compensates for unstable images caused by
camera-shake, particularly noticeable at high magnifica-
tion.
ACTIVATE D. I. STABILIZER
1 Press D.I.STABILIZER. “ ” appears in the viewfinder.
•To switch off the Digital Image Stabilizer, press
D.I.STABILIZER. The indicator disappears.
NOTES:
● Accurate stabilization may not be possible if hand
shake is excessive, or under the following conditions:
• When shooting subjects with vertical or horizontal
stripes
• When shooting dark or dim subjects
• When shooting subjects with excessive backlighting
• When shooting scenes with movement in various
directions
• When shooting scenes with low-contrast
backgrounds
● When the Slow Shutter function is activated
(
੬
pg. 23), the Digital Image Stabilizer (DIS) cannot
be used. If you try to activate this function while DIS is
engaged, “
” blinks, telling you that DIS has been
deactivated.
● Switch off D.I.STABILIZER when recording with the
camcorder on a tripod.
Exposure Control
This feature automatically adjusts the iris for the best
available picture quality, but you can override and make
the adjustment manually.
SELECT SHOOTING MODE
1 Set the Shooting Mode selector to “PRESET”.
BRIGHTEN IMAGE
2 Press + (maximum +06). The Exposure level
indicator appears in the viewfinder.
OR . . .
DARKEN IMAGE
Press – (maximum –06). The Exposure level
indicator appears in the viewfinder.
When you want to return to the factory setting . . .
RESTORE INITIAL SETTING
3 Press + and – simultaneously. The standard setting is
immediately restored and the Exposure level
indicator disappears.
To brighten the image
To darken the image
+
D.I. STABILIZER
Exposure Level Indicator
Viewfinder
–
Shooting Mode Selector
D.I.S. Indicator