JVC DR-MH50S - Manual (Page 26)

26
EN
BASIC OPERATIONS ON DVD DECK
Slow Motion
1
Press W to pause during playback.
2
Press SLOW – ( O) or SLOW + (N) for 2 or more seconds.
● Each press of SLOW – ( O) or SLOW + (N) increases the
slow motion speed for each direction.
● Slow motion for reverse direction cannot be performed with
Video CD/SVCD discs.
Skip Search
During playback, press v.
● Each press initiates an approximately 30 second period of fast-
motion playback. Normal playback resumes automatically.
Jump Search
You can locate a scene ahead or behind the current one by
jumping scenes according to selected time intervals (
A pg. 71)
during playback (or Live Memory Playback).
Press JUMP – or JUMP +.
● To advance forward or back, press JUMP – or JUMP +
repeatedly within 5 seconds of each press to continue jump.
● Depending on the time from where you want to start jump search,
the first press of JUMP – or JUMP + will not necessarily lead to a
jump of the selected time interval. The first press will lead to a
jump to the nearest quarter points of an hour (15 min/ 30 min/
45 min/ 00 min). The subsequent jumps will then be in
accordance to the selected time interval.
● When you cannot advance any further (beginning or end of
programme reached), the message
AUNABLE TO GO BACK
ANY MORE B appears on the screen and the on-air screen
resumes. In such a case, press S, O or o.
Example:
Playback search when jump interval is set to 15 MIN jumps.
Taking for instance, you want to start jump search 40 minutes after
the beginning of the programme. Pressing JUMP – or JUMP + will
result in a jump to the scene at the 30 minutes point or 45 minutes
point respectively as illustrated below. At the subsequent press,
the scene will jump to the 15 minutes point or 1 hour point
respectively, according to the selected time interval, which in this
case is
A15 MINB.
NOTE:
Jump search cannot be performed with finalised DVD-R/DVD-RW
(video mode) discs.
Resume Function
It is possible to memorise the position where you stop playback
and resume playback from that position.
● Be sure to set ARESUMEB to AONB or ADISC RESUMEB.
( A pg. 71)
● Resume function always works for DVD-RAM regardless of the
setting of
ARESUMEB.
1
Press o during playback to memorise a resume point.
● The unit enters Resume Stop mode and memorises the
position where you have stopped playback as a resume point.
(The inside of the disc status indicator on the front display panel
blinks while memorising.)
● The unit retains a memory of the resume points of the last
30 discs played back, even though they have been ejected if
ARESUMEB is set to ADISC RESUMEB. (A pg. 71)
● To clear the resume points:
(The inside of the disc status indicator stops blinking and
lights.)
When
ARESUMEB is set to AONB:
• Press A to turn off the unit.
• Press
M
to take out the disc.
• Press
o
in stop mode.
• Press TOP MENU to display the top menu, then start playback by
selecting an item, etc.
• Press MENU to display the disc menu, then start playback by
selecting an item, etc.
When ARESUMEB is set to ADISC RESUMEB:
• Set ARESUMEB to AOFFB. ( A pg. 71)
• Press o in stop mode.
• Press TOP MENU to display the top menu, then start playback by
selecting an item, etc.
• Press MENU to display the disc menu, then start playback by
selecting an item, etc.
2
Press I in stop mode to resume playback. The unit starts
playback from the resume point.
NOTES:
● ADISC RESUMEB setting works on DVD VIDEO, VCD, SVCD and
already finalised DVD-R/DVD-RW (video mode) discs. For other
types of discs, the function under
AONB setting will be applied
even if ARESUMEB is set to ADISC RESUMEB. (A pg. 71)
● If you stop the playback of a disc for which a resume point has
already been memorised, the memory will be updated with the
new resume point.
● After the unit has memorised the resume points for 30 discs,
remembering a new resume point will cause the unit to delete the
oldest memorised point. Stopping playback of a disc for which a
resume point is already stored may change the order in which the
points are stored. This may potentially change the order in which
points are deleted.
● When the unit memorises a resume point for a disc, it also
remembers audio language, subtitle and angle settings.
● This function may not work for some Video CD/SVCDs.
● When ARESUMEB is changed to AONB or AOFFB (A pg. 71),
resume points of the discs memorised with ARESUMEB set to
ADISC RESUMEB will be cleared.
● Resume points are memorised for each side of a double-sided
disc.
● When you switch to HDD during CD playback, playback stops.
The Resume Function doesn’t work when you switch to DVD
thereafter to playback the disc.
Time counter
Beginning of programme Current scene End of programme
0 min
30 min 1 h
40 min 1 h 15 min
15 min 45 min