JVC DLA FS-X3 - Manual (Page 22)

20
Using the Timers
The timers let you control listening functions automatically.
Two types of timers are available:
DAILY Timer
Use this timer to set wake up everyday to music from
any source, including melodies.
SLEEP Timer
Fall asleep and have your System turn off automatically
after a certain length of time.
Setting the Clock
When you plug the AC power cord into the wall outlet, the
time indication “0:00” and the Clock indicator (
) blink
on the display in standby (System off) mode.
You can set the clock whether the System is on or off (but
not in power saving mode (See page 10)).
• The clock must be correctly set for the timers to work.
• The clock may gain or lose one to two minutes per month.
On the Remote Control
1 Press the CLOCK/TIMER button.
The hour digit of the time indication blinks on the dis-
play, also, the Clock indicator (
) blinks.
• If the clock is already set and the Clock indicator ( ) is
not blinking, press the CLOCK/TIMER button repeatedly
until the clock setting display appears on the display.
Each time you press the CLOCK/TIMER button, the dis-
play changes as follows.
DAILY ON?/DAILY OFF?
= ON (time) = Clock setting
display* = Cancelled = (back to the beginning)
*: Select this item!
2 Press the
3
or
2
button to set the hour.
Pressing the 3 button moves the time forwards and
pressing the 2 button moves it backwards. Holding
down the button moves the hour.
* When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
SLEEP
SET
SLEEP indicator
CLOCK/TIMER
DAILY indicator
Clock indicator
3 2
CANCEL
STANDBY/ON
FS-X3(A)_E.book Page 20 Friday, March 28, 2003 2:57 PM