Quickspecs, Hp proliant bl20p p-class server blade options – Server Technology QUICKSPECS BL20P User Manual
Page 19
NOTE: For more information regarding ProLiant Essentials Software, please see
the following URL:
NOTE: Flexible and volume quantity license kits are available for ProLiant
Essentials Value Packs. Refer to URL
Value Pack product QuickSpecs for more information.
Processor
Pentium III P1400-512KB Processor Option Kit
234277-B21
Memory
(SDRAM DIMMs)
2048 MB PC133MHz Registered ECC SDRAM Memory Kit (2x1024 MB)
201695-B21
1024 MB PC133MHz Registered ECC SDRAM Memory Kit (2x512 MB)
201694-B21
512 MB PC133MHz Registered ECC SDRAM Memory Kit (2x256 MB)
201693-B21
256 MB PC133MHz Registered ECC SDRAM Memory Kit (2x128 MB)
201692-B21
Hard Drives
Ultra 320 SCSI – Universal Hot Plug
72.8GB 10,000 rpm, U320 Universal Hard Drive, 1"
286714-B22
300-GB 10,000 rpm, U320 Universal Hard Drive 1"
350964-B22
36.4GB 15,000 rpm, U320 Universal Hard Drive, 1"
286776-B22
72.8GB 15,000 rpm, U320 Universal Hard Drive, 1"
286778-B22
NOTE: All U320 Universal Hard Drives are backward compatible to U2 or U3
speeds.
NOTE: Please see the Hard Drive QuickSpecs for Technical Specifications such
as capacity, height, width, interface, transfer rate, seek time, physical
configuration, and operating temperature:
U320 Hard Drive QS:
(Worldwide)
(North America)
Storage Controllers
Battery Backed Write Cache Enabler Option Kit
255514-B21
Battery Backed Write Cache Enabler Option Kit (Japan)
255514-291
NOTE: Please see the following Controller QuickSpecs for Technical
Specifications such as PCI Bus, PCI Peak Data Transfer Rate, SCSI Protocols
supported, SCSI Peak Data Transfer Rate, Channels, SCSI Ports, Drives
supported, Cache, RAID support, and additional information:
(Smart Array 5I)
Communications
Dual NC7780 Gigabit Upgrade Module for ProLiant BL20p
230255-B21
NOTE: The Dual NC7780 Gigabit Upgrade Module replaces two of the standard
NC3163 Fast Ethernet Embedded WOL (Wake On LAN) NICs to two
10/10/1000T NC7780 NICs.
NOTE: The GbE Interconnect Switch options support server NIC speeds to 100
Mbps. It is recommended that the patch panel or GbE2 Interconnect Switch
options be used with the Dual NC7780 Gigabit Upgrade Module if server NIC
speeds to 1000 Mbps are required.
QuickSpecs
HP ProLiant BL20p p-Class Server Blade
Options
DA - 11411 Worldwide QuickSpecs — Version 24 — 9.24.2004
Page 19