User instructions – Smeg DWD409WH User Manual
Page 10
User instructions
38
SELECTION PROGRAM
The program selection is possible
through the relative buttons (2).
When the button relating to the program required (see enclosed
programs chart) is pressed, the relative light will come on to confirm the
operation.
START PROGRAM
To start the appliance, simply press the button of the chosen program
and keep it pressed for a few seconds; the PROGRAM PHASES lights
(7) will go out, until the light of the first phase of the selected program
start flashing (confirmation buzzer).
At this point the PROGRAM PHASES lights (7) will illuminate as the
program progresses, indicating the point reached in the washing
procedure:
The light of the phase in progress will
flash, and will remain constantly on while
heating is in progress.
Prewash
Wash
Dry
Rinse