Initial settings, How to set 38, Etime period setting (continued) – Sanyo DSR-3706PA User Manual

Page 39

Advertising

English

Initial settings

How to set

Set automatic scrolling, masking or motion sensor
for the time periods (A/B).

The default setting for "SELECT TIME PERIOD" is A for
all items. When the specified time comes, these
operations will work in time period A, but more detailed
settings are necessary.

☞

Set the camera video for automatic scrolling
(P73)

The main monitor and monitor 2 can have different
settings for each of the four time intervals (T-1~T-4).

☞

Masking specific camera images (P75)

Unnecessary camera images can be set to invisible
for each of the four time intervals (T-1~T-4).

☞

Set motion sensors for camera videos (P58)

Motion sensors can be set for camera videos for
each of the four time intervals (T-1~T-4), and use
those as alarms for intruders.

b Changing the time period of operations

Turn the S-dial clockwise.

The "TIME PERIOD A" of SEQUENCE starts blinking.

Select "TIME PERIOD B" by turning the J-dial, and
then turn the S-dial clockwise.

Repeat the same procedure to select the time period for
MASK and MOTION SENSOR.

Example:

Press the EXIT/OSD button when the settings are
complete.

The operation returns to the normal screen.

b Setting the times for the time periods

• If T-1 ~ T-4 are all set to "00:00", then only T-1 will be valid.

T-1 will start at 12:00am (midnight) and end at 12:00am
(midnight) of the next day.

• It is not possible to set T-3 and T-4 to a period that would

extend into the next day.
In this case, set T-4 to "23:59".

• If T-4 is set to "00:00", T-4 becomes invalid and operations

skip from T-3 to T-1. The set operation will last from T-3 to
T-1.

Time period setting (continued)

SELECT TIME PERIOD

SEQUENCE TIME PERIOD A

MASK TIME PERIOD A

MOTION SENSOR TIME PERIOD A

<MAIN/MON.2 MONITOR SET>