Push2talk, Intercom, English – Snom 300 User Manual
Page 50
s n o m 3 x 0 V o I P P h o n e s
U s e r M a n u a l
E n g l i s h
4 4 •
Phone Configuration
© snom technology AG 2007
English
Push2Talk
L Note: Your VoIP PBX must support this function.
The following settings must have been configured in advance:
Your phone: Setup Advanced Behavior
Enable Intercom
: <ON>
Other phones: Setup Advanced Behavior
Auto Answer Policy
: <Always>
Dependencies:
•
Context:
<SIP Identity> or <Active>
•
Number:
<extension>
Description: Similarly to the “Intercom” function, users can make intercom calls. This
feature is particularly useful for group announcements.
Usage:
•
Enable Intercom mode
: Press this key to connect your phone directly to the
extension specified under “Number”, if authentication has been set up properly.
The adjacent LED lights up.
The intercom call will remain active as long as the
programmed key is pressed.
•
Disable Intercom mode
: The intercom call will be terminated as soon as the free
function “Push2Talk” key is released. The adjacent LED will be turned off.
Intercom
L Note: Your VoIP PBX must support this feature.
The following settings must have been configured in advance:
Your phone: Setup Advanced Behavior Enable Intercom: <ON>
Other phones: Setup Advanced Behavior Auto Answer Policy: <Always>
Dependencies:
•
Context:
<SIP Identity>
•
Number:
<extension>
Description: This key function enables the “Intercom” mode and is useful in an office
environment as a quick access to connect to the operator or the secretary.
Usage:
•
Enable Intercom mode
: Press an “Intercom” key to connect your phone directly to
the extension specified under “Number”, if authentication has been set up properly.
The adjacent LED lights up.
•
Disable Intercom mode
: Terminate the intercom call as usual (see page 59)