Automatic update, English – Snom 300 User Manual
Page 56
s n o m 3 x 0 V o I P P h o n e s
U s e r M a n u a l
E n g l i s h
5 0 •
Phone Configuration
© snom technology AG 2007
English
Automatic update
L Note: This method requires an internet connection.
The automatic update is conducted via the phone’s web user interface.
Action: Conduct an automatic firmware update
snom 300
snom 320
snom 360
snom 370
Navigate to snom’s online knowledge database and read
carefully.
Copy the
link
of the appropriate update method
(recommended “
Update once
to current official firmware release”):
http://provisioning.snom.com/release/update_once.php
Access the phone’s web user interface (
below Version 7
):
Setup Advanced Update
Setting URL
and paste the
link
into that field.
Save the change by clicking on Save and start the update by clicking on Reboot
The phone reboots automatically
Warning: Any power interruption during the following process will most likely lead
to a flash memory error. As a result the system cannot boot up anymore and the
phone must be sent in for repairing at your own expense.
The phone automatically loads the necessary software from snom’s web server
successively. The whole update process may take some time.
The phone will be initialized using the previously stored phone configuration.
Result: The firmware is updated. You can verify the successful update as described in
chapter “Version Check” on page 48.