Sony CMT-GP8D - Manual (Page 38)

38 GB
B MD IN L/R jacks
Use audio cords (not supplied) to connect an
optional analog component (MD deck or VCR,
etc.) to these jacks. You can then record or listen
to from the component through this system.
C S VIDEO OUT jack
Use an S video cord (not supplied) to connect an
optional TV to this jack. Set VIDEO OUT
SELECTOR to S VIDEO OUT while the system
is off. You can enjoy higher quality video
images.
D VIDEO OUT SELECTOR
Set VIDEO OUT SELECTOR depending on
which jack is connected to the TV only while the
system is off.
E T LINE-TV jack (for Russian
model)
Use an optional SCART cord to connect a TV.
Check that the TV conforms to RGB signals. If
the TV conforms to RGB signals, change the
input mode of the TV to RGB signals, then set
VIDEO OUT SELECTOR on the unit to
T LINE-TV while the system is off. Refer to
the operating instructions supplied with the TV
to be connected.
E COMPONENT VIDEO OUT
jacks (for other models)
Use an optional component video cord to
connect a TV. Set VIDEO OUT SELECTOR to
COMPONENT VIDEO OUT while the system
is off.
Use buttons on the unit for the operation.
1
Connect audio cords.
See “Hooking up optional components” on
page 37.
2
Press MD to switch the function to MD.
Start playing the connected component.
Listening to audio from a
connected component