Sharp R-963S - Manual (Page 10)

the LANGUAGE key. If this occurs during cooking,
the programme will be erased. The time of day will
also be erased.
4. When you want to reset the time of day, follow the
above example again.
5. If you do not want to set the clock, press the STOP
key once. will appear on the display.
When the operation of the oven is finished,
will reappear on the display instead of the time of
day.
6. If you set the clock, energy save mode does
not work.
There are two setting modes: 12 hour clock and 24 hour clock.
Step 1
x1
1. To set the 12 hour clock, press the CLOCK SETTING key once as in
Step 1.
2. To set the 24 hour clock, press the CLOCK SETTING key twice as in
Step 2 .
Step 2
x2
Example:
To set the 24 hour clock to 23:35.
2. Input the hours. Press the TIME
keys until the correct hour is
displayed (23).
Check the display. 4. Input the minutes (35).
Press the TIME keys.
NOTES:
1. Press the STOP key if you make a mistake during
programming.
2. If the oven is in cooking or timer process and you
wish to know the time of day, press the CLOCK
SETTING key. As long as your finger is pressing
the key, the time of day will be displayed.
3. If the electrical power supply to your microwave
oven is interrupted, plug in the oven again, then
open and close the door. The display will show
“ENERGY SAVE MODE TO GO OUT OF ENERGY
SAVE MODE SET CLOCK”. This information will
appear if you have already set the language with
1. Choose the 24 hour clock
by pressing the CLOCK
SETTING key twice.
3. Change from hours to minutes
by pressing the CLOCK
SETTING key once.
5. Press the CLOCK SETTING
key to start the clock.
8
SETTING THE CLOCK
Use the STOP key to:
1. Erase a mistake during programming.
2.
Stop the oven temporarily during cooking.
3. Cancel a programme during cooking, press
the STOP key twice.
USING THE STOP KEY
x2 x2 x3
x1
x3 x5 x1
R-963 English 01/07/2000 11:54 Page 8