Sharp R-963S - Manual (Page 4)

2
OVEN AND ACCESSORIES
18
ACCESSORIES:
Check to make sure the following accessories
are supplied:
13 Turntable 14 Turntable support
15 Low Rack
16 High Rack 17 Square shelf 18 Square Tin
• Place the turntable support into the coupling in the centre of
the oven floor, ensuring you place it TOP side up, (TOP is
engraved on one side). It should be able to freely rotate
around the coupling.
• Place the turntable on to the turntable support.
• Place the high/low racks onto the turntable if necessary.
• When using the square shelf or square tin, place them onto
the shelf runners as shown in Fig. A. When using the square
shelf, ensure the shelf locator is on the right side.
NOTES:
• Always operate the oven with the turntable and support fitted
correctly. This promotes thorough even cooking. A badly fitted
turntable may rattle, may not rotate properly and damage the
oven.
• The turntable rotates clockwise or counter clockwise. The
rotary direction may change each time you start the oven.
This does not affect cooking performance.
• When you order accessories, please mention two details:
part name and model name to your dealer or SHARP
authorised service facility.
13
14
These racks are used for cooking in
Convection, Dual or Grill mode.
1 Grill heating
element
2 Oven lamp
3 Control panel
4 Shelf runners
5 Waveguide cover
6 Oven cavity
7 Coupling
8 Door seals and
sealing surfaces
9 Door opening
handle
10 Air-vent openings
11 Outer cabinet
12 Power cord
2
4
1
8
9
6 5 7
16
15
17
3
12 11
Coupling
Shelf locator
Square shelf
Fig. A
10
Use for convection only. See page13.
R-963 English 01/07/2000 11:53 Page 2