Sharp FO-5700 - Manual (Page 20)

Connections
18
Note: The message PC PRINTING will appear in the display when the
fax machine prints a print job from your computer. While this message
appears, you will not be able to use the operation panel of the fax
machine.
4
Press the panel keys as shown to set
Option Setting 31 (PC Interface
Mode) to ON. (The option settings are
explained in more detail in Chapter 6,
Optional Settings.)
•
Before you can use the fax machine
as a printer, you must also install
the printer software. To install the
software, see the documentation
that accompanies it.
4
FUNCTION
3 1
1
Verification Stamp (option)
Note: This function is available as an option. Consult your dealer if you
wish to use it.
When transmitting a document, you can have your fax stamp each
document page as it is scanned. After scanning, you can check to see
if all documents have been stamped to verify that no double feeds
occurred. (A double feed is when two pages are fed through the
scanner at once, which means that one of the pages is not scanned.)
To use this function, have your dealer install the Verification Stamp
option, and then set Option Setting 29 to ON as explained in Chapter
6, Optional Settings.
STOP STOP
all-FO4700.book Page 18 Friday, June 11, 1999 1:57 PM