Connecting projector, 12 connecting projector, Terminals of projector – Sanyo PLV75L User Manual

Page 12: Input terminal (analog), Reset button, 5 bnc input jacks, R/c jack, Input terminal (digital), Audio input 1 jack audio input 2 jack

Advertising
background image

12

CONNECTING PROJECTOR

S–VIDEO

R–AUDIO–L

VIDEO/Y Cb/Pb Cr/Pr

VIDEO/Y

Cb/Pb

Cr/Pr

RESET

CONTROL PORT

AUDIO 1

AUDIO 2

ANALOG

DIGITAL(DVI-D)

INPUT 1

INPUT 2

INPUT 3

R/C JACK

G

B

R

H/V

V

(MONO)

TERMINALS OF PROJECTOR

When controlling the projector
from a computer, connect the
computer to this connector
with a control cable. (Refer to
P13.)

Connect S-VIDEO
output from video
equipment to this
jack. (Refer to P14.)

Connect an audio output
from video equipment to
these jacks.
(Refer to P14.)

CONTROL PORT CONNECTOR

AUDIO INPUT JACKS

VIDEO INPUT JACKS

S-VIDEO INPUT JACK

Connect composite video
output from video equipment
to VIDEO/Y jack or connect
component video outputs to
VIDEO/Y, Cb/Pb and Cr/Pr
jacks. (Refer to P14.)

Connect computer output
(Analog HDB 15 pin type)
to this terminal.
(Refer to P13.)

INPUT TERMINAL (ANALOG)

This projector has input and output terminals on its back for connecting computers and video equipment. Refer to figures on
pages 12 to 14 and connect properly.

This projector uses a micro processor
to control this unit, and occasionally,
this micro processor may malfunction
and need to be reset. This can be
done by pressing RESET button with a
pen, which will shut down and restart
unit. Do not use RESET function
excessively.

RESET BUTTON

Connect component video
output (Y, Cb, Cr or Y, Pb, Pr)
from video equipment to
VIDEO/Y, Cb/Pb and Cr/Pr
jacks or connect computer
output {5 BNC Type (Green,
Blue, Red, Horiz. Sync and
Vert. Sync.)} from computer
to G, B, R, H/V and V jacks.
(Refer to P13 and 14.)

5 BNC INPUT JACKS

When using Wired/Wireless
Remote Control Unit as Wired
Remote Control, Connect
Wired Remote Control Unit to
this jack with Remote Control
Cable (not supplied).

R/C JACK

Connect an audio output
(stereo) from computer to
this jack.
(Refer to P13.)

Connect computer output
(Digital DVI-D type) to this
terminal.
HD (HDCP Compatible) signal
can also be connected.
(Refer to P13.)

INPUT TERMINAL (DIGITAL)

Connect an audio output
(stereo) from computer to
this jack.
(Refer to P13.)

AUDIO INPUT 1 JACK

AUDIO INPUT 2 JACK

Advertising