Sanyo PLV75L - Manual (Page 31)

31
When video input signal is connected to Y-Pb/Cb-
Pr/Cr jacks, select Y, Pb/Cb, Pr/Cr.
Y,Pb/Cb,Pr/Cr
SELECTING INPUT SOURCE
Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT buttons to move a red frame pointer to
INPUT Menu icon. 1
Move a pointer (red arrow)
to source and press
SELECT button.
Source Select Menu (VIDEO)
Move a pointer to source that you want to select and then press
SELECT button. 3
When video input signal is connected to VIDEO jack,
select Video.
Video
When video input signal is connected to S-VIDEO jack,
select S-Video.
S-Video
When connecting to those equipment, select a type of Video
source in SOURCE SELECT (VIDEO) Menu.
WHEN SELECT INPUT 3 (AV TERMINALS )
WHEN SELECT INPUT 2 (5 BNC INPUT JACKS )
INPUT MENU
Move a pointer (red
arrow) to Video or
Y, Pb/Cb, Pr/Cr and
press SELECT button.
Source Select Menu
Press POINT UP/DOWN buttons to move a red arrow pointer to
Input 3 and then press SELECT button. Source Select Menu will
appear. 2
When video input signal is connected to Y-Pb/Cb-
Pr/Cr jacks, select Y, Pb/Cb, Pr/Cr.
Y,Pb/Cb,Pr/Cr
When video input signal is connected to VIDEO jack,
select Video.
Video
When connecting to those equipment, select a type of Video
source in SOURCE SELECT Menu.
Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT buttons to move a red frame pointer to
INPUT Menu icon. 1
Move a pointer to source that you want to select and then press
SELECT button. 3
Press POINT UP/DOWN buttons to move a red arrow pointer to
Input 2 and then press SELECT button. Source Select Menu will
appear. 2
Input 2
INPUT Menu icon
Move a pointer (red arrow) to
Input 2 and press SELECT
button.
Input 3
INPUT Menu icon
Move a pointer (red arrow) to
Input 3 and press SELECT
button.
INPUT MENU
VIDEO INPUT
Input
Input
SELECTING INPUT SOURCE
DIRECT OPERATION
Select INPUT source by pressing INPUT button on Top Control or on
Remote Control Unit.
Select INPUT source by pressing INPUT 1, INPUT 2 or INPUT 3
button on Remote Control Unit.
If projector cannot reproduce proper image, select correct input source
through MENU OPERATION (see below).
INPUT button
Input 1
Input 2
Input 3
NOTE;
INPUT SOURCE changes if the INPUT 2 button on Remote Control
Unit is pressed.
NOTE;
INPUT SOURCE changes if the INPUT 3 button on Remote Control
Unit is pressed.
SVGA 1
SVGA 1
Input 1
Input 2
Input 3
Input 1
Input 2
Input 3