Troubleshooting guide, Specifications, Pecifications – Samsung DVD-N501 User Manual

Page 19: Roubleshooting guide

Advertising
background image

37

36

S

pecifications

*: Nominal specification

2 Channel

Output Level

*Frequency Response

*S/N Ratio

*Dynamic Range

*Total Harmonic Distortion

S-VIDEO

Composite Video

Component Video

VCD : 5"

CD : 3

1/2

"

(COMPACT DISC)

CD : 5"

(COMPACT DISC)

DVD

(DIGITAL VERSATILE DISC)

Operating Temperature Range

Operating Humidity Range

Dimensions

Weight

Power Consumption

Power Requirements

AC 120 V, 60 Hz

15W

6.2lbs

16.9(W) x 9.4(D) x 3.1(H)/inch

+41°F to +95°F

10 % to 75 %

Reading Speed : 11.45 ft/sec

Approx. Play Time

(Single Sided, Single Layer Disc) : 135 min

Reading Speed : 3.9 to 4.6 ft/sec

Maximum Play Time : 74 min

Reading Speed : 3.9 to 4.6 ft/sec

Maximum Play Time : 20 min.

Reading Speed : 3.9 to 4.6 ft/sec.

Maximum Play Time : 74 min (Video + Audio)

1 channel : 1.0 Vp-p (75

load)

Y : 1.0 Vp-p (75

load)

Pr : 0.70 Vp-p (75

load)

Pb : 0.70 Vp-p (75

load)

Luminance Signal : 1.0 Vp-p (75

load)

Color Signal : 0.286 Vp-p (75

load)

(L, R)

Analog : 2 Vrms (1 kHz)

Digital : 1.15 Vp-p

48 kHz Sampling : 4 Hz to 22 kHz

96 kHz Sampling : 4 Hz to 44 kHz

110 dB

92 dB

0.003 % (In case of 1 KHz)

General

Disc

Video

Output

Audio

Output

• Samsung Electronics Co., Ltd reserves the right to change the specifications without

notice.

• Weight and dimensions are approximate.

T

roubleshooting Guide

Before requesting service (troubleshooting)

No operations can be
performed with remote.

The screen ratio
cannot be changed.

No audio.

Playback mode differs
from the Setup Menu
selection.

Disc Menu doesn’t
appear.

The icon appears
on screen.

Forgot password

If you experience other
problems.

Disc does not play.

• Check the batteries in the remote. May need replacing.
• Operate the remote control at a distance of no more than 20

feet.

• Remove batteries and hold down one or more buttons for

several minutes to drain the microprocessor inside the
remote to reset it. Reinstall batteries and try remote again.

• Ensure that the disc is installed with the label side facing up.
• Check the region number of the DVD.
• This player cannot play CD-ROMs, DVD-ROMs, CD-R, etc.

Insert a DVD, a VIDEO-CD or a CD.

• The features or action cannot be completed at this time

because:

1. The DVD’s software restricts it.
2. The DVD’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search

time that is out of range.

• Check if the disc has a Menu.

• Some of the functions selected in the Setup Menu may not

work properly if the disc is not encoded with the correspond-
ing function.

• The Screen Ratio is fixed on your DVDs.

• Make sure you have selected the correct Digital Output in

the Audio Options Menu.

• Press power on from a cold start with no disc in the unit. Press

the STOP and PLAY buttons simultaneously on the front panel
for three seconds. “All setup value will be reset to factory
settings. Your player will be shut off.” will appear. Press the
MENU button on the remote control to select the Parental Mode.
The Parental Mode is now unlocked as indicated on the display.
Press the DOWN button to select Parental. Press ENTER and
the Password Check display will appear. Enter the default pass-
word of “9999”. You can now set your rating level and change
your password to a new number.

• Turn the player off and unplug it to reset the DVD player.

Wait approximately 2 minutes, plug the player back in and
turn it on.

• Go to the contents and find the section of the instruction

book that contains the explanations regarding the current
problem, and follow the procedure once again.

• If the problem still cannot be solved, please contact your

nearest authorized service center.

Action

Problem

Page

P6

P4

P19

P18

P20

P28~30

P16~20

P14, 15

Will not read disc or

other error message.

REFERENCE

Advertising