Samsung DVD-N501 - Manual (Page 5)

9
D
escription-Rear Panel
1 DIGITAL AUDIO OUT JACK
• Use an optical or coxial digital cable to connect to a compatible Dolby Digital receiver.
Use to connect to an A/V Amplifier that contains a Dolby Digital decoder or DTS decoder.
2 ANALOG AUDIO OUT JACKS
• Connect to the Audio input jacks of your television, audio/video receiver, or VCR.
3 VIDEO OUT JACK
• Use a video cable to connect to the Video input jack on your television.
4 S-VIDEO OUT JACK
• Use the S-Video cable to connect this jack to the S-Video jack on your television for
a higher quality picture.
5 COMPONENT VIDEO OUT JACKS
• Use these jacks if you have a TV with Component Video in jacks. These jacks provide Pr,
Pb and Y video. Along with S-Video, Component Video provides the best picture quality.
Rear Panel Jacks
1 2 3 4 5
8
Front Panel Display
D
escription-Front Panel
1 2 3 4 5 6 7 8 9
1 STANDBY/ON
• When the unit is first plugged in,
this indicator lights.
2 NUON PORTS
• Allow you to plug in a joystick or other
peripherals.
3 DISPLAY
• Operation indicators are displayed here.
4 DISC TRAY
• Press OPEN/CLOSE to open and close
the disc tray.
5 OPEN/CLOSE
• Press to open and close the disc tray.
6 SCREEN FIT
• Allows you to eliminate the black bars
of the screen and fill any TV screen
completely with the picture.
7 PLAY/PAUSE
• Begin or pause disc play.
8 STOP
• Stops disc play.
9 SKIP
• Use to skip chapters or tracks.
Front Panel Controls
1 Angle indicator. You can select
multiple angles of a scene recorded
by different cameras.
2 Disc type indicators
3 Reverse play / Pause / Forward play
4 Lights when 3D surround is turned on.
5 Title number
6 Chapter number.
7 Video/Audio CD : Track number
8 Repeat play mode
9 Linear PCM audio output
10 Dolby Digital Audio output
11 DTS (Digital Theater System) output
12 MP3 indicator
13 MPEG-2 Audio output
14 Displays various messages
concerning operations such as PLAY,
STOP, LOAD, ...
no DISC : No disc loaded.
OPEN : The disc tray is open.
LOAD : Player is loading disc
information.
HDCD : When an HDCD ®
recording is detected,
the letters “HDCD” will flash
for about 10 seconds
at the beginning of every
track.
1
11
12
13 14 4 3
2 5 6 7 8 9 10
SETUP